Introduction
192.168.l00.1: There are various IP addresses to log in to the Login Admin panel. These IPs are a group of four numbers that range from 0 to 256. 192.168.100.1 is one of the famous IP addresses that we use for logging in to router settings.
Manufacturers use IP 192.168.l00.1 like Lenovo, Motorola, and ZyXel. This Ip is famous primarily in Indonesia and the USA on the other hand least used by New Zealand. In this blog post, we will discuss IP addresses, how to login to the router admin page
Click the link below to log in to 192.168.100.1
What is 192.168.l00.1?
For home broadband routers, the private IP address 192.168.100.1 is commonly used as the main gateway. Due to the fact that it falls within the range of IP numbers reserved for private networks. This IP address cannot be used on the public internet.
When you join a home network, the router which acts as a gateway to the internet gives your computer an IP address. You can access the router’s configuration screen by entering the address 192.168.100.1 into a web browser on a connected device. From there, you can set the network name and password, port forwarding, and other advanced options.
Default Login credentials for 192.168.100.1
Username | Password |
---|---|
admin | admin |
admin | password |
user | user |
admin | motorola |
The table includes the default login details for the wifi companies that use the IP address 192.168.l00.1 as default.
When you use the internet at home, your devices like your computer or phone talk to a special box called a router. The router helps your devices connect to the internet by using an address called the “default gateway,” which is usually set to 192.168.100.1. This address helps your devices find their way out of your house and onto the wider internet so you can access websites and other online services.
Steps To Login 192.168.100.1
Step 1: Connect your PC or smartphone to your wifi network.
It would be best to remember that you should connect your device to the primary network instead of a guest network. This is a common mistake that people often make. So ensure that your device is connected to the primary network. Preferably use a PC to ease up the process.
Step 2: Open any web browser, type 192.168.100.1 in the URL, and enter.

Please verify that you have typed the correct IP since people ordinarily mistake it for 192.168.l00.1, which is entirely wrong and will land you on an error page. The correct IP is 192.168.100.1. You can copy-paste it from this page.
Step 3: You will be redirected to the login page if you have completed the first two steps properly. Now fill in your Login Credentials.

Most Probably, the username and password are set to default by the router’s manufacturer. The default login details are mentioned below in this post, and You can log in using them. At last, check the Remember me column and click login.
Uses of IP 192.168.l00.1
Home broadband routers mainly use 192.168.100.1 as their default gateway IP address. It functions as a point of entry for network administrators to establish the router’s settings and control the network’s connected devices.
The common uses for accessing the router`s configuration page at 192.168.100.1 are:
- Improve network security by changing the network name (SSID) and password.
- Configure port forwarding to allow remote access to devices on your network.
- Upgrade firmware to fix bugs and add new features to your router.
- Set parental controls to restrict access to certain websites and online content for her.
- Check the network status, such as the number of connected devices and the strength of the wireless signal.
192.168.100.1 is an IP address set as the default Gateway address by router companies such as Motorola, Zy Xel, Lenovo, Arris, Planet, etc. This IP address helps you to log in to your router’s configuration panel, where you can modify various settings such as changing your wifi password, modifying the network security type, setting up a new guest network, and adding or removing a mac address, changing your SSID name, etc.
So these were the uses to log in to Router Admin Panel.
Misspelt keyword for 192.168.100.1
Often people use 192.168.l00.1 instead of 192.168.100.1, which is a typo. The letter L is incorrect in the third number, due to which you are unable to log in to the admin panel. The actual character is 1 (one) instead of l (EL).
Correct IP 😊 | Incorrect IP 🙁 |
192.168.100.1 ✔️ | 192.168.l00.1 ❌ |
Troubleshooting of Router
-
Wifi Connection Error for 192.168.l00.1
If you cannot connect to your wifi, maybe you have forgotten the wifi password. Don’t worry; we have a solution for that; you can use an Ethernet cable to bypass the password required to connect and then access the router login process.
If you do not have an ethernet cable, you can follow the second simple procedure, but it will factory reset your wifi network. Press the reset key on the back of your router for 10 seconds, It will reset your router to its default settings, and you can easily connect again to your wifi.
If your internet isn`t working or your device can’t connect to the network, you can type 192.168.100.1 into your internet browser to go to your router’s special web page. This page will help you understand what’s going wrong by showing you information about your router, the devices connected to your network, and a test to see if everything is working properly.
-
What is my IP Address?
If 192.168.l00.1 is not working for you; You can use other IP addresses to log in to your router settings, such as 192.168.1.1, 192.168.2.1, 192.168.0.1, 10.0.0.1, 192.168.8.1, etc.
However, the best ways to find your IP address are mentioned below.
- Follow the user’s manual provided by the manufacturer of your router. The default IP address for your router must be mentioned on it. You can use that IP address to log in to the admin panel. If you do not have the user manual, you can still find your IP address with the help of the following method.
- Open Command Prompt, i.e., shell on your PC either Windows or Mac, then type “ipconfig” in the shell and hit enter.

Please scroll down to the end and find Default Gateway. The IP address written in front of it is your default gateway address to log in to your router settings. The image below will help to find your IP address.

-
Default Login Credentials.
Every router manufacturer has set default login details for their routers; the IP 192.168.100.1 is a default IP for router companies such as Lenovo, Motorola, ZyXel, etc. The default username and password for 192.168.l00.1 are mentioned above in the thirst subheading. However, if those details aren’t working for you to log in, you can factory reset your router to its default settings and again try to log in with the default credentials.
Security Considerations
Keeping your home network safe and secure is really important to protect your personal information and to stop strangers from accessing your network. Luckily, you can make some simple changes to improve your network security. Two important things to do are changing the default login details for your router and making sure your wireless network is encrypted with WPA2. These steps can make a big difference in keeping your network safe and secure.
WPA2 encryption is a method of securing your wireless network that helps prevent unauthorized access by encrypting the traffic between your devices and your router. This is important because wireless networks broadcast their signal beyond the walls of your home. This makes it easy for someone nearby to try and gain access to your network. WPA2 encryption ensures that only devices with the correct password can connect to your network and access your personal information.
Browser Keeps Loading – Unable to access anything?
- If your browser is stuck at the loading screen, this means you may have entered the wrong IP Address. And 192.168.100.1 is not your default gateway. Find out the IP that works for your router brand and try to log in again. Know how to log in to other IP addresses on our home page.
- Sometimes the browser shows a loading error because we make a typo by typing 192.168.l00.1 instead of 192.168.100.1 here the first IP address contains the letter l instead of the integer 1
- If the firewall restricts you from logging in, disable it temporarily and try to log in again.
Conclusion
In summary, this blog post uses 192.168.100.1 as the default gateway for home wifi routers. This highlights the importance of the router configuration page to diagnose network connectivity issues. We also showed you that you can protect your personal information and prevent unauthorized network access by changing the default username and password and enabling WPA2 wireless network encryption.
