192.168.10.1: So far in the previous posts, we have discussed different IP addresses, their usage, troubleshooting, and much more. In this article, we will discuss in brief the IP address 192.168.l0.1 !
192.168.10.1 IP address is mainly used by Motorola, D-Link, Toshiba, Medialink, etc., and brands routers as their default IP address to log in to the router configuration settings.
Click the link below to log in to 192.168.l0.1 !
Steps to Login to 192.168.l0.1
Step 1: Open any web browser on your PC or mobile, type 192.168.10.1 in the URL, and press enter.
Note: Make sure that your device is connected to the primary Wi-Fi network to log in to the router settings. Sometimes we connect our device to the wrong Wi-Fi network or Guest network; this won’t just work since you can not open the router admin panel if you are connected to the Guest network.
Step 2: Fill in your login credentials and click the login button. Make sure to check the “Remember me” column.
If you do not know your username and password, you can log in using the default login credentials set by your router’s parent company. Some of the default usernames and passwords are mentioned in this article.
Step 3: Once you have entered the correct login details, you can log in successfully to the router settings homepage. Now you are all set, you can modify any settings such as changing your Wi-Fi password, modifying your network’s security type, setting up a new Guest network, etc.
So these are the simple steps you can follow to log in to 192.168.10.1 with ease.
Default Usernames and Passwords for 192.168.l0.1 !
Username | Password |
---|---|
admin | motorola |
- | admin |
admin | password |
Misspelled IP for 192.168.10.1 !
A number of people are confused while logging in to 192.168.10.1 this is because of the typo error that they made by mistake. People often use 192.168.l0.1 as the IP while logging in however this is an incorrect IP address and will land you on an error page. Therefore instead of using the IP 192.168.l0.1 the correct alternative IP address is 192.168.10.1
Correct IP 😊 | Incorrect IP ☹️ |
192.168.10.1 ✔️ | 192.168.l0.1 ❌ |
Some Troubleshooting Tips for Logging in to 192.l68.10.1
-
What to do if you can not connect to your network?
If you forgot your Wi-Fi password and can’t connect to your network, don’t worry; Since you were using the IP 192.168 l0 1 and it didn’t work, but you can still connect to your Wi-Fi by plugging in the ethernet cable into your computer and the router. In this way, you can bypass the password required and connect directly to the network.
However, if you still do not have an ethernet cable, there is one last thing you can do to connect to your network. Press the reset key on the back of your router for about 10 seconds; It will reset your router to its default settings and default login password. You can find the default password for your Wi-Fi on the internet by searching for the router’s parent company.
-
What is my IP Address?
If you do not know your IP address or 192.168.10.1 is not working for you. Don’t worry; we have a solution for you! So all you need to do is first connect your network to a pc that has windows or mac installed on it. Then open the command prompt and type “ipconfig” then hit enter. You will see a screen, as shown in the image below.
You need to find the ‘Default Gateway’ the IP is written in front. It is your default IP address. For proper illustration, you can see the image attached below.
-
Don’t know your username and password for Router Login?
If you have forgotten your username still, it is not a big deal. You need to know that you can log in to your router panel by using the default username and password set by your router’s parent company. Some of the default usernames and passwords are mentioned above in this article as a table; you can try to log in using those credentials.
Still, if you are stuck on the login page and can’t access your router settings using the IP 192.168l0.1 just reset your router by pressing the reset button for 10 seconds. It will factory reset all the grounds, including the Wi-Fi password and your login username and password. Afterwards, you can log in with the default credentials.
FAQ IP Address
How do I login as admin on WIFI?
To log in as an admin on your WIFI, you need to follow the steps mentioned below.
- Open any browser on your PC and make sure that you are connected to the WIFI.
- Type 192.168.10. 1 in the URL and press enter.
- Fill in your username and password for authentification and press the login button.
Why is 192.168 1.1 not opening?
When logging in to your WIFI router configuration, you need to ensure the following things.
- Ensure you are connected to the same WIFI for which you want to open the router settings.
- Check whether you are using the proper IP address. 192.168.10. 1 is mainly used for tenda login and PTCL router login.
- When you are on the login page, fill in your username and password and press the login button. If you do not know your log-in info, you can read this article’s second topic.
How do I change my 192.168 10.1 password?
192 l.168.10.1 change password, If you want to reset the password for 192.168.l0.1 admin log-in then you need to follow the steps written below.
- Connect a PC to your WIFI and open any internet browser.
- Type the IP address 192.168.10. 1 in the URL and press enter.
- Enter your login credentials for authentification and press the login button.
- Find the Wireless on the security menu, click on WPA, fill in your desired password, and save settings.
How do I find my IP password?
To find your IP address:
- Open the command prompt on your pc and type ipconfig and press enter.
- Make sure that your pc is connected to the WIFI.
- Look for Default Gateway.
The IP address is written on front of it.
If you don’t know your username and password, you can reset your router by pressing the reset button given on the router for ten seconds, and it will reset the router to its default settings.
More About The IP 192.168 l0 1
- 192.168.l0.1 admin login tp link
TP-Link is a router manufacturing company that uses IP addresses such as 192.168 l0 1, 192.168.1.1, 192.168.0.1, 10.0.0.1 these IP addresses are used for router login.
- 192.168.l0.1 login
The IP 192.168.l0.1 is used for logging into the router settings so that we can configure the network settings.
